Operation Manual

BlueFRITZ! Installing an ISDN Set with a Preconfigured Connection
BlueFRITZ! USB – 3 Using the Bluetooth Stick BlueFRITZ! USB 25
BlueFRITZ! Installing an ISDN Set with a
Preconfigured Connection
If you install a BlueFRITZ! ISDN Set with a preconfigured con-
nection, the connection between BlueFRITZ! USB and Blue-
FRITZ! AP-ISDN will be established automatically. Proceed as
follows for installation:
1. BlueFRITZ! AP-ISDN receives electrical power via the IS-
DN NT. Make sure that the ISDN NT is connected to the
power supply.
2. Connect BlueFRITZ! AP-ISDN to the ISDN NT.
3. Insert BlueFRITZ! USB in your PC's USB port.
4. Insert the installation CD.
5. Select the option “Install software automatically (rec-
ommended)”.
6. In the next window, select the option “CD-ROM drives”.
The program reports that a driver was found.
7. Conclude the installation by clicking “Finish”.
Now the BlueFRITZ! program is started. The connection be-
tween BlueFRITZ! USB and BlueFRITZ! AP-ISDN is established
automatically.
Internet Access with BlueFRITZ! USB and a
Bluetooth Access Point
With the BlueFRITZ! USB and a Bluetooth access point you
can establish fast and secure access to the Internet. Use the
FRITZ!web module of the FRITZ! communication software for
this task.
After connecting and installing BlueFRITZ! USB and the Blue-
tooth Access Point, the next step is to configure an Internet
connection in FRITZ!web.
BlueFRITZ!USB-e.book Seite 25 Montag, 18. September 2006 3:36 15