Operation Manual

Application Examples
24 BlueFRITZ! USB – 3 Using the Bluetooth Stick BlueFRITZ! USB
drive connections are possible only when sharing of the
printer/scanner has been enabled on the computer to which
it is connected.
All network computers can establish a direct Bluetooth con-
nection to all other devices like mobile phones and PDAs.
3.4 Application Examples
This section describes examples of how BlueFRITZ! USB can
be used with other Bluetooth devices.
Establishing a Bluetooth Connection to an AVM
Access Point
Work through the following steps to establish a connection
between BlueFRITZ! USB and an AVM Access Point:
1. Click the program icon and select “Display connec-
tions”.
2. The BlueFRITZ! window opens. Click the BlueFRITZ! USB
device icon in the “Local Bluetooth Device” section and
then select the command “Search for New Bluetooth
Devices”.
3. In the list of the Bluetooth devices found, select the
AVM Access Point and then click “Select Bluetooth De-
vice”.
4. Enter the Bluetooth passkey of the Access Point. The
passkey is printed on the underside of the Access Point.
The Access Point is listed as a known Bluetooth device
in BlueFRITZ!.
5. Click the new connection icon and select the “Connect
with... / All Profiles” command.
The Bluetooth connection is established.
BlueFRITZ!USB-e.book Seite 24 Montag, 18. September 2006 3:36 15