Operation Manual

Errors During Installation: What to Do
16 BlueFRITZ! USB – 2 Installing BlueFRITZ! USB
2.10Errors During Installation: What to Do
If no connection can be made to a Bluetooth device during
the BlueFRITZ! USB installation, please note the following:
No Bluetooth devices were found.
z Check whether the Bluetooth device is located within
transmission range of BlueFRITZ! USB. Try to establish a
connection over a shorter distance.
z Make sure that the power supply of the Bluetooth
device is secure.
Could not register at the Bluetooth device.
z Make sure you enter the passkey correctly. The passkey
is case-sensitive!
Try again to connect to the Bluetooth device.
Perform the following steps:
z Double-click the BlueFRITZ! icon in the notification area
of the Windows taskbar.
The BlueFRITZ! window opens.
z Click the BlueFRITZ! USB device icon in the “Local
Bluetooth Device” section and then select the
command “Search for New Bluetooth Devices”.
z Follow the instructions in the section “The Control
Software BlueFRITZ!” on page 13.
BlueFRITZ!USB-e.book Seite 16 Montag, 18. September 2006 3:36 15