Operation Manual

Installing the FRITZ! Communications Software
14 BlueFRITZ! USB – 2 Installing BlueFRITZ! USB
2.8 Installing the FRITZ! Communications
Software
Once the BlueFRITZ! control software has been installed you
can install the FRITZ! communications software.
Proceed as follows for installation:
1. Insert the installation CD. The installation of the FRITZ!
software starts automatically.
2. Enter the folder on your computer in which FRITZ! is to
be installed. Confirm with “Next”.
3. The next step is to specify the program folder for FRITZ!
in the start menu. Confirm with “Next”.
4. Select the programs to be installed. Confirm with
“Next”.
5. First you are asked whether you work at a PBX exten-
sion. Select this option only if the your access point's
ISDN cable is not connected directly to the ISDN access
of your NT. Confirm with “Next”.
This completes the installation of the FRITZ! communications
software. In the next step you can install the AVM ISDN CAPI
Port Driver.
BlueFRITZ!USB-e.book Seite 14 Montag, 18. September 2006 3:36 15