Operation Manual
Installing the Driver Software in Windows 2000
BlueFRITZ! USB – 2 Installing BlueFRITZ! USB 11
2.5 Installing the Driver Software in
Windows 2000
Administrator rights are required to install the driver soft-
ware in Windows 2000.
Once the BlueFRITZ! USB has been connected to your com-
puter, the Found New Hardware Wizard of Windows 2000 is
started automatically.
1. Insert the installation CD and follow the instructions on
the screen.
2. In the next window, select the option “Search for a suit-
able driver for my device (recommended)” and confirm
your selection with “Next”.
3. In the next window, select the option “CD-ROM drives”
and confirm by clicking “Next”.
4. The program reports that a driver was found. Click
“Next” to install the driver.
5. A message appears: “Windows has finished installing
the software for this device”. Conclude the installation
by clicking “Finish”.
This completes the driver installation. For more information,
see the section “The Control Software BlueFRITZ!” on
page 13.
BlueFRITZ!USB-e.book Seite 11 Montag, 18. September 2006 3:36 15