Operation Manual

Update
BlueFRITZ! AP-X – 5 Configuring BlueFRITZ! AP-X 41
Update
Use this menu to update the PBX software (firmware) to keep
your PBX up with the latest technology.
5.2 Factory Settings
Your BlueFRITZ! AP-X telecommunications system is ready for
operation with the factory settings.
The following settings are configured upon delivery:
z The Bluetooth passkey will be reset to the value printed
on the sticker on the bottom of the device base.
z No Multiple Subscriber Numbers (MSNs) are assigned
to the individual extensions. All extensions ring for all
incoming calls.
z All extensions are set to automatic outside dialing. You
hear the external dial tone immediately when you pick
up the receiver.
z Call waiting is deactivated for all extensions.
z Reject calls when busy (Busy on Busy) is deactivated for
all extensions.
z Call forwarding via the second B channel is deactivated
for all extensions.
z Call forwarding is disabled for all MSNs.
z Suppression of the outgoing Caller ID is deactivated for
all extensions.
z Incoming Caller ID display is activated for all exten-
sions.
z The Do Not Disturb function is disabled for all exten-
sions.
z The LCR function is disabled for all extensions.
z The Group Call function is disabled for all extensions.
z For terminal devices that support SMS, the acceptance
of SMS messages is activated for all extensions.