Operation Manual

Installing the Communications Software FRITZ!
BlueFRITZ! AP-X – 3 Software Installation 29
7. Next, the sign-on window of the installation program for
BlueFRITZ! AP-X appears. Specify the folder in which the
driver software of BlueFRITZ! AP-X is to be installed on
your computer.
8. As a final step of the driver software installation, a mes-
sage box is displayed showing the configuration of
BlueFRITZ! AP-X. Click “Next”.
9. Next you will be prompted to reboot the computer. Click
“Yes”.
The computer will be restarted automatically.
This concludes the installation of the BlueFRITZ! AP-X PBX.
BlueFRITZ! AP-X is now ready for immediate operation.
Then a message that the FRITZ! communications software
can be installed appears. Click the “Install” button, and con-
tinue reading with the following section.
3.6 Installing the Communications
Software FRITZ!
After driver software for the BlueFRITZ! AP-X PBX has been in-
stalled, the setup program reports that the FRITZ! communi-
cations software can be installed.
1. Click the “Next” button to proceed.
2. Specify the folder in which the FRITZ! communications
software is to be installed on your computer.
3. The next step is to specify the program folder for FRITZ!
in the Start menu.
4. Choose the FRITZ! module you want to install.
5. Specify in the next window whether your BlueFRITZ!
AP-X is connected to a PBX.
If your line is a PBX extension that requires a prefix for
outside dialing, check the “Private Branch Exchange”
option. This activates the additional options below.