Operation Manual

Update
BlueFRITZ! AP-ISDN – 4 Configuring BlueFRITZ! AP-ISDN 19
Version
This settings page contains the version number of the appli-
cation started when you click the “Bluetooth” button.
Update
Use this menu to update the PBX software (firmware) to keep
your access point up with new technology.
For a PBX software update, proceed as follows:
1. Establish a CIP connection to your access point using
BlueFRITZ! USB.
2. Start “FRITZ!X” and select the “Update” menu command
from the main window.
3. In the text field, enter the path to the update file.
Alternatively, click the “Find Firmware Update File...” but-
ton to search for the file. The file must have the “.dat” file-
extension and must be a valid BlueFRITZ! AP-ISDN update
file. The version number of the update file is displayed. If
the version of the update file is more current than the one
already installed, the update is recommended.
4. Start the update by clicking the “Update” button.
5. A safety prompt appears. If you are sure you want to per-
form the firmware update, confirm the message. If the up-
date version is the same or older than the currently active
version, you are prompted again to confirm that you want
to install it nonetheless.
Never abort an update in progress!
6. A message appears announcing that the update has
been successfully completed.
This completes the update operation. The “Firmware ver-
sion” panel now shows the new version number.