Operation Manual

Bluetooth
18 BlueFRITZ! AP-ISDN – 4 Configuring BlueFRITZ! AP-ISDN
is that the user must know the passkey of the ISDN access
point, which is printed on the label on the base of the hous-
ing.
Access Point
Here the access point currently in use is displayed, complete
with device name, Bluetooth address and features. The de-
vice name can be changed here.
Settings
The settings options on this page allow you to control the
Bluetooth client’s use of the access point.
Here you can specify under what conditions the device
should continue to allow unknown clients to log in to
the access point: unrestricted, for the next 15 minutes,
or not at all.
The clients accepted by the access point can be dis-
played in a list and entries from this list may be delet-
ed. Accepted clients are those who have connected to
the access point successfully at least once and have not
been deleted from the list of accepted clients.
The passkey for connecting to the access point can be
changed here.
ISDN use can be enabled or disabled for the Bluetooth
clients.
Connections
This list registers all clients currently connected to the ac-
cess point. The clients are shown with their Bluetooth ad-
dress. The list displays the parameters of the Bluetooth con-
nection: duration, transmitter power, field intensity, link
quality, error rate, number of packets sent and amount of
bytes sent.
Click the “Update” button to update the list.