Specifications

Installation in Windows OS/2
ISDN-Controller B1 PCI v4.0 – 10 Installation in Windows OS/2 53
10 Installation in Windows OS/2
For operation in OS/2 specially developed drivers are includ-
ed with delivery. Any existing OS/2 applications based on
CAPI 1.1 can also be used with this driver software. Informa-
tion on CAPI can found in the section “The Applications Inter-
face CAPI 2.0” on page 61.
10.1 Installing the Driver Software
Proceed as follows to install the driver software in OS/2:
1. Insert the “AVM ISDN-Controller B1 PCI v4.0” CD in your
CD-ROM drive.
2. Open the “System” directory and double-click “Drives”.
Then click the icon of your CD-ROM drive. Switch to the
directory below:
\CARDWARE\B1_PCI\OS2\ENGLISH
3. Start the INSTALL.EXE program.
4. An OS/2 command-line window opens and the installa-
tion program’s welcome screen appears. Press “Return”.
The installation can be aborted at any time by pressing
“Ctrl + x”.
5. In the next dialog you are asked whether the AVM ISDN-
Controller B1 PCI v4.0 is to be loaded automatically ev-
ery time OS/2 is started. Activate the desired option
and confirm with “Return”.
6. Now select the D-channel protocol used on your ISDN
line. DSS1 (Euro ISDN), NI1, 5ESS, 1TR6.
7. Next specify the directory in which the driver software
for the ISDN-Controller is to be installed.
The driver software then is copied to the specified di-
rectory.
HB_B1V40-e.book Seite 53 Freitag, 24. September 2004 4:41 16