Specifications

Removing the ISDN-Controller B1 PCI v4.0
44 ISDN-Controller B1 PCI v4.0 – 8 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12
8.6 Removing the ISDN-Controller B1 PCI
v4.0
To remove the ISDN-Controller B1 PCI v4.0 in Novell NetWare
6.x, 5.x, 4.x or 3.12, proceed as follows:
1. In Novell NetWare 6.x or 5.x, enter the following com-
mand at the system console:
load nwconfig
to load the installation menu of the Novell NetWare
server. The “Configuration Options” menu of the config-
uration program appears.
In Novell NetWare 4.x or 3.12, enter the following com-
mand at the system console:
load install
to load the installation menu of the Novell NetWare
server. The “Installation Options” menu of the configu-
ration program appears.
Select the “Product Options” item from the menu and
press “Return”.
2. If you are removing the ISDN-Controller from a NetWare
3.12 server, a list of the programs already installed ap-
pears.
If you are removing the ISDN-Controller from a NetWare
6.x, 5.x or 4.x server, open the menu “Other Installation
Actions”. Select here the entry “View/Configure/Re-
move installed products” and press “Return”. A list of
the programs already installed is displayed.
3. Move the highlight to the entry for the AVM ISDN-Con-
troller B1 PCI v4.0 and press “Del”. Confirm with “Yes”.
4. Press “Esc” as often as necessary to close all submenus
and return to the “Configuration Options” menu.
5. Select “Exit” to leave the installation program.
This concludes the uninstallation of the AVM ISDN-Controller
B1 PCI v4.0 in Novell NetWare.
HB_B1V40-e.book Seite 44 Freitag, 24. September 2004 4:41 16