Specifications

Installing Additional Controllers
ISDN-Controller B1 PCI v4.0 – 8 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12 43
– Automatic Data Compression
Information on CAPI SoftCompression can be found in
the section “CAPI SoftCompression X75/V42bis” on
page 66.
10. Exit the configuration dialog by pressing “Esc” twice
and select “Yes” to confirm that you want to save the
new settings.
11. The final step in the configuration process is to update
the system and load the controller.
In the “Internetworking Configuration” window, select
the “Reinitialize System” command and confirm it by
selecting “Yes”.
12. Exit the configuration by pressing “Esc”. Answer “Yes”
to save your settings.
This concludes the configuration and loading processes for
the ISDN-Controller B1 PCI v4.0 with the CAPI Manager.
The ISDN-Controller B1 PCI v4.0 settings can be changed at
any time using this method.
8.5 Installing Additional Controllers
If you want to install additional ISDN-Controllers, enter at the
system console:
load b1setup
In the list of available ISDN-Controllers, press “Ins”. Each
time a controller is installed, another ISDN-Controller is
displayed, complete with an available I/O address and inter-
rupt level.
HB_B1V40-e.book Seite 43 Freitag, 24. September 2004 4:41 16