Specifications

Installing the Driver Software
ISDN-Controller B1 PCI v4.0 – 8 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12 39
8.1 Installing the Driver Software
Before you begin the driver installation in Novell NetWare
4.x or 3.12, install the operating system patch LANDR9 or
higher, available from Novell.
The following instructions describe installation in Novell
NetWare 6.x. Minor deviations may arise for Novell NetWare
5.x, 4.x and 3.12.
In order to install the driver software, carry out the following
steps:
1. Start your computer.
2. Insert the “AVM ISDN-Controller B1 PCI v4.0” CD in your
CD-ROM drive.
3. Enter the following command:
load nwconfig
to load the installation menu of the Novell NetWare
server. The “Configuration Options” menu of the config-
uration program appears.
4. Select the “Product Options” item from the menu and
press “Return”.
On a NetWare 3.12 server, the screen now displays a list
of the programs already installed.
Version 5.x or 4.x NetWare servers show a menu labeled
“Other Installation Actions”. Select the “Install a product
not listed” item from the menu and press “Return”.
5. The disk drive A:\ is suggested by default. To specify
another path, press “F3”.
6. To install the driver software for the Stand-Alone ver-
sion of the ISDN-Controller, enter the following com-
mand:
<CD-ROM DRIVE>\CARDWARE\B1_PCI\
NETWARE\CAPI20\ENGLISH
HB_B1V40-e.book Seite 39 Freitag, 24. September 2004 4:41 16