Specifications

Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12
38 ISDN-Controller B1 PCI v4.0 – 8 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12
8 Installation in Novell
NetWare 6.x, 5.x, 4.x and 3.12
Once the AVM ISDN-Controller B1 PCI v4.0 has been physical-
ly installed in your computer, the next step is to install the
driver software. You have the option of installation in the
NetWare versions 6.x, 5.x, 4.x and 3.12.
Two installation variants are supplied for Novell NetWare
6.x, 5.x and 4.x: Stand-Alone CAPI and CAPI Manager.
The CAPI manager in 6.x is only available with the “Small
Business Edition”. If you would like to use the Novell CAPI
Manager, make sure that it is installed before installing the
ISDN-Controller B1 PCI v4.0.
For Novell NetWare 3.12, only the Stand-Alone CAPI driver is
available.
The Novell CAPI Manager is a part of the Novell NetWare 4.x,
5.x and the “Small Business Edition” of Novel NetWare 6.x
operating systems and is supplied by Novell.
The installation and uninstallation procedures are almost
identical for both driver types and for all three Novell Net-
Ware versions. Configuration and operation of the ISDN-Con-
troller B1 PCI v4.0 is different depending on whether the
Stand-Alone CAPI or the CAPI Manager version is used.
HB_B1V40-e.book Seite 38 Freitag, 24. September 2004 4:41 16