Specifications
Table Of Contents
- Title
- Legal Notes
- Contents
- Typographical Conventions
- 1 Introduction
- 2 Installing the ISDN-Controller B1 PCI v4.0
- 3 Installation in Windows XP
- 4 Installation in Windows 2000
- 5 Installation in Windows NT
- 6 Installation in Windows Me
- 7 Installation in Windows 98
- 8 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12
- 8.1 Installing the Driver Software
- 8.2 Configuring the ISDN-Controller B1 PCI v4.0 with Stand-Alone CAPI
- 8.3 Starting Operation of the ISDN-Controller B1 PCI v4.0 with Stand-Alone CAPI
- 8.4 Configuration of the ISDN-Controller B1 PCI v4.0 with CAPI for the CAPI Manager
- 8.5 Installing Additional Controllers
- 8.6 Removing the ISDN-Controller B1 PCI v4.0
- 9 Installation in Linux
- 10 Installation in Windows OS/2
- 11 Special Types of Connections
- 12 AVM System Architecture
- 13 Technical Summary
- 14 Troubleshooting
- 15 Information, Updates and Support
- Index
- Declaration of CE Conformity
Removing the ISDN-Controller B1 PCI v4.0
32 ISDN-Controller B1 PCI v4.0 – 6 Installation in Windows Me
6.4 Removing the ISDN-Controller B1 PCI
v4.0
Proceed as follows to remove the AVM ISDN-Controller B1 PCI
v4.0 driver software in Windows Me:
1. Select “Start / Settings / Control Panel”, then double-
click the “Add/Remove Programs” icon.
2. The list of software installed includes an entry for the
“AVM ISDN-Controller B1 Family”. Select this entry and
click the “Add/Remove...” button.
The uninstall program is started.
3. When you have finished, restart your computer.
Restarting the computer concludes the uninstallation of the
driver software.
Only one ISDN-Controller can be removed at a time. If you
have installed several ISDN-Controllers and want to remove
them all, then perform the procedure described here several
times, without restarting Windows between each operation.
HB_B1V40-e.book Seite 32 Freitag, 24. September 2004 4:41 16