Specifications

Changing the Settings
ISDN-Controller B1 PCI v4.0 – 3 Installation in Windows XP 15
1. Run the SETUP.EXE file.
This files is located in the <CD-ROM DRIVE>\CARDWARE\
B1_PCI\WINDOWS.XP\ENGLISH folder on the installa-
tion CD.
2. The installation program displays its sign-on dialog.
Click “Continue”.
3. In next dialog, select “Update” and once again “Continue”.
In the next dialog Windows may prompt you to install
software not digitally signed by Microsoft. This request
depends on the driver signature options set on your
computer. Answer the question with “Continue Any-
way”.
Repeat this procedure in the next dialog for the AVM
CoNDIS WAN CAPI Driver.
4. After the driver software installation is concluded, a
window appears reporting that the software was updat-
ed successfully.
5. Click “Finish” and restart your computer.
After installation the CAPI 2.0 and the AVM ISDN NDIS WAN
CAPI Driver are available on your system. For details about
the AVM ISDN NDIS WAN CAPI Driver and the other two AVM
system drivers, see the section “The AVM System Drivers” on
page 64.
3.2 Changing the Settings
After installation is concluded, you have the opportunity to
change the D-channel protocol and the MSNs of the ISDN-
Controller. To do so, proceed as follows:
1. Select “start / Control Panel / Performance and Mainte-
nance / System”. On the “Hardware” dialog page, click
the “Device Manager” button.
2. Click on the plus sign “+” next to “Network adapters” to
expand the node.
3. Click the entry “AVM ISDN-Controller B1 PCI” with the
right mouse button.
HB_B1V40-e.book Seite 15 Freitag, 24. September 2004 4:41 16