Specifications

Task Checklist
46 AVM Access Server – 4 AVM Access Server Use Scenarios
Task Checklist
The following steps must be carried out both in the main office in Berlin
and at the London subsidiary:
Step by Step
Steps A through F listed above must be performed both in Berlin and in
London. The procedures are described in detail below. Please note that
there are several differences in the instructions for the two locations.
A Verify the Network Settings in the Windows Control Panel
Make sure that the following conditions are fulfilled:
A default gateway must be entered in the TCP/IP properties for at
least one LAN adapter.
All LAN adapters to be used in conjunction with the AVM Access
Server must be configured with fixed IP addresses.
Proceed as follows:
1. In the Control Panel, open the “Network Settings”.
2. Click the LAN connection you will use with the AVM Access Server
with the right mouse button, and select “Properties” in the con-
text menu.
3. Select “Internet Protocol (TCP/IP)” in the list of network com-
ponenets and click “Properties”.
Installation and configuration
A Verify the network settings in the Windows Control Panel
B Install the AVM Access Server
C Configure the ISDN-Controller for the appropriate line type
D Create a remote network in the AVM Access Server with channel bundling
for a total of eight B channels
E Create a schedule and activate it in the remote network configuration
F Test the connection