Specifications

AVM Access Server Use Scenarios
44 AVM Access Server – 4 AVM Access Server Use Scenarios
4 AVM Access Server Use Scenarios
This chapter describes the use of the AVM Access Server in various
configurations and application scenarios. The installation and configu-
ration of the AVM Access Server is described in detail for each scenar-
io, with special attention to points that are important for you to note.
4.1 LAN-to-LAN Link Using AVM ISDN-Controller
C4 and Eight B Channels
A company has its main office in Berlin and a subsidiary in London. The
two locations’ networks are to be linked over ISDN using eight
B channels. The B channels should be set up dynamically on demand.
The connection should only be available during business hours, from
9:00 a.m. to 5:00 p.m. In this way the subsidiary will be permanently
connected to the main office in order to enter data in centralized serv-
ers.
Configuration Objectives
In the main office in Berlin, set up a “Remote network” for the
connection to the London office.
In the London office, set up a “Remote network” for the
connection to the main office in Berlin.
Configure the remote network connections at both locations to
use channel bundling with seven dynamically added B channels.
Create a schedule for the remote network connections at both
locations.