Specifications

Step by Step: AVM Access Server Installation and Basic Configuration
22 AVM Access Server – 2 Installation and Initial Configuration
In the example, the option “Activate pre-defined budget” is selected
3. All the settings you have selected are then presented in a summa-
ry. Click “Finish” to close the Configuration Wizard.
Settings for Unmetered Internet Access
If you pay only a flat monthly fee for Internet access, you should acti-
vate the AVM Access Server option “Flat rate”. The connection is then
maintained continuously, even when idle.
In the example, the flat rate option is activated on both AVM Access
Servers, in Berlin and in London.
1. In the AVM Access Server window, select “T-Online DSL” in the
“Internet” folder. Under “Inactivity timeout” on the “General” dia-
log page, activate the option “Flat rate: maintain connection”.
2. Then click “Apply” to activate all of the new settings in the AVM
Access Server configuration.
Set up Dynamic DNS
Before you can set up dynamic DNS in the AVM Access Server, you
must register with a dynamic DNS provider. In the example, Dynamic
DNS is set up on both AVM Access Servers, in Berlin and in London.
The procedure described below must be carried out twice: once for the
AVM Access Server in Berlin and once for the AVM Access Server in Lon-
don.
1. Open your web browser for a LAN connection.
2. Deactivate any proxy server settings in your browser configura-
tion.
3. In the browser's address field, enter www.dns4biz.com.
4. Click “Sign Up” then on “free service”.
5. Fill out the “Host details” form.