Specifications

Installation and Initial Configuration
AVM Access Server – 2 Installation and Initial Configuration 15
2 Installation and Initial
Configuration
The AVM Access Server is installed by a simple, menu-driven program.
When the initial installation is completed, the Configuration Wizard
starts automatically and supports you in configuring the basic settings
to start the AVM Access Server.
We recommend that you plan the basic configuration that you will set
up using the Configuration Wizard ahead of time, before you install the
AVM Access Server.
In the instructions below, the installation and set-up procedures are
described using a hypothetical application scenario. In this scenario,
for the sake of example, VPN connections over the Internet will be set
up to a remote user and to a remote network.
2.1 Installation and Initial Configuration:
An Example
This section describes the installation and configuration of the AVM
Access Server using an example that combines two common require-
ments:
setting up a remote user with VPN access
setting up a LAN-to-LAN VPN link
The fold-out diagram inside the front cover illustrates this sample sce-
nario. The diagram contains the IP addresses used throughout all ex-
amples, as well as space for you to note the IP addresses used in your
configuration.
In following the procedures described here, remember to replace the
IP addresses used in the examples with those actually used in your
LAN!