Specifications

Alternating Between Calls
72 FRITZ!Box Fon 5124 – 10 Configuration and Operation by Telephone
Alternating Between Calls
Whenever you have an active call 1 and one caller 2 on hold,
you can switch from one call to the other as often as you
want using the Hold button.
To alternate between two connections, proceed as follows:
The alternating connections can be ended in a number of
ways:
Call 1
P
You are talking to Caller 1.
R
Press the Hold button. Call 1 is now on hold.
M
To establish a second call, simply dial either the
desired extension number or the outside line access
“0” followed by the desired external number.
Call 2
P
If the call is answered, you can consult with caller 2
on this line. Call 1 is still on hold.
R2
To switch back from Call 2 to Call 1, dial the
sequence shown at left.
Call 1
P
Call 1 is now active again and Call 2 is on hold.
R2
To switch back again from Call 2 to Call 1, dial the
same sequence. In this way you can alternate
between Call 1 and 2.
O
The caller on hold hangs up. You can continue talking
on the active connection.
R1
You end the active connection by dialing the
sequence shown at left. The call that was on hold is
now active again.
O
K
Call
P
You can also return to the call on hold by hanging up
the handset: this ends the currently active
connection. In this case the phone rings as soon as
you hang up. Pick up the handset again to return to
the last call that was on hold.