Instructions

4. If the “”Perform Update button is available next to the
“FRITZ!WLANRepeater” in the overview: Perform the update
and wait until the message “Update was successful” appears.
If no update is available, continue with the next step.
5. Start WPS on the FRITZ!Box. To do this, press the
“Connect/WPS” button on the FRITZ!Box until the “Info” LED
starts flashing.
6. Within 2 minutes, start WPS on FRITZ!WLANRepeater. Press the
“WPS” button briefly.
The FRITZ!WLANRepeater is integrated into the Mesh of the
FRITZ!Box. As soon as the procedure is concluded, the
FRITZ!WLANRepeater is displayed in the Mesh Overview of the
FRITZ!Box with the “Mesh enabled” symbol: .
Mesh with FRITZ!
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
95FRITZ!Box7590