Instructions

Instructions: Configuring a USB Printer in Other Operating Systems
In operating systems other than Windows or MacOSX, configure the
following settings to set up a USB printer as a network printer:
1. As the port type, select “Raw TCP”.
2. Enter 9100 as the port.
3. Enter fritz.box as the printer name.
If the FRITZ!Box is configured as a wireless repeater or an IP
client, enter here the IP address at which it can be reached in
the network.
Configuring USB2.0 and USB3.0
For power saving operation of the FRITZ!Box, the “Home Network /
USB Devices / USB Settings” menu in the user interface offers the
following settings for the USB ports:
Power Mode (USB3.0) Green Mode (USB2.0)
Full power:
up to 3 times faster than USB2.0
Reduced power
Increased power consumption Reduced power consumption
Preset for the port on the back Preset for the port on the side
Operating USB devices at a USB port in “Power Mode” may result in
slower data transmission in the 2.4-GHz wireless network and poor
voice quality in telephone calls with DECT cordless telephones.
The occurrence of interference depends on the quality of the USB cable
used. To remedy interference, select “Green Mode” and/or switch to
wireless LAN in the 5-GHz band.
User Interface: Home Network Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
169FRITZ!Box7590