User manual

Connecting with the Web Router Wirelessly

3 Connecting with the Web Router Wirelessly

You can connect the FRITZ!WLAN Repeater with a FRITZ!Box or other

wireless access point (web router) over a wireless radio network.

You can establish the wireless connection using WPS or the configura-

tion wizard.

3.1 Establishing a Wireless LAN Connection Using WPS

Using WPS (Wi-Fi Protected Setup), you can establish a secure

wireless LAN connection at the push of a button.

Requirements

• The wireless access point must support WPS and WPS

must be enabled.

• The “WLAN Bridge” operating mode must be set in the

FRITZ!WLAN Repeater (preconfigured upon delivery of

the FRITZ!WLAN Repeater).

• The SSID (radio network name) of the wireless access

point must be set to “visible” (announced).

• If the MAC address filter of the wireless access point is

enabled, the MAC address of the FRITZ!WLAN Repeater

must be entered as an exception.

In the presettings of the latest FRITZ!Box models WPS is en-

abled, the SSID is visible and the MAC address filter is dis-

abled.