User manual

FRITZ!Fon M2 57
Setting Up FRITZ!Fon M2
FRITZ!Fon 57
13 Setting Up FRITZ!Fon M2
You can configure individual settings for the FRITZ!Fon M2 in the
“Settings” menu
If you use FRITZ!Box as a base station, additional functions and set-
tings for the FRITZ!Box are available in the FRITZ!Fon M2 user inter-
face.
13.1 “Settings” Menu
The “Settings” menu offers you the following settings options and
device information:
• Display: set contrast, illumination and hibernation.
• Telephony: set picking up directly and eavesdropping security
for your DECT connection.
• Registration: register and deregister FRITZ!Fon M2 with a base
station and select a base station for FRITZ!Fon M2. FRITZ!Fon
M2 can be registered with up to four base stations.
• Firmware update: perform a firmware update for FRITZ!Fon M2.
This function can be used only with a FRITZ!Box as base sta-
tion.
• Firmware version: the firmware version of your FRITZ!Fon M2.
Our staff requires this for support requests.
Press the “Menu” key.
Select “Settings” and then press “OK”.
Handbuch_FRITZ!Fon M2-en.fm Seite 57 Mittwoch, 10. Oktober 2012 1:39 13