AVLinx 2x1 Audio and Digital Video Switch Model ADV2.1 Instruction Manual 1 www.avlinx.
Table of Contents Introduction Thank you for your purchase of the AVLinx ADV2.1 HDTV Switch. At AVLinx, we are motivated by a passion for quality audio/video equipment that fulfills the technological needs of our customers. Every item we sell is designed to provide the ultimate in signal integrity, system integration, and user control.
Identification Identification Remote Control Accessories The following items are included with this product: 5V 1A Wall Power Pack Signal Transmitter Power Toggle Key Infrared Remote Control The following items are optional accessories that can be purchased to accompany this product: DVI Cable DB9 Cable Digital Audio Cables DVI Cable Extenders Front Panel Input Selector Button Direct Input 1 1 2 Allows the user to toggle between power on/off 3 4 Direct Input 2 Allows the user to select input 1
The ADV2.1 The ADV2.1 supports two DVI video inputs, each paired with digital audio connections. The DVI inputs support the full 165Mhz maximum clock rate of the DVI Single-Link Specification allowing it to work with all HDTV signal sources and up to 1600x1200 graphics resolution. Since the DVI standard is fully digital, all data is passed flawlessly through the ADV2.1.
Operations Operations Changing the Unit’s Power State Switching Inputs Once the unit is plugged in, the power state can be changed in one of the following three ways. There are three ways to switch inputs on the unit: using the input selector button on the front panel, using the remote control, and using the RS-232 communication port. Using the Input Selector Button - Pressing the input selector button on the front panel once while the unit is turned off will power the unit on.
Operations Using an Alternate Remote LED Display Dimming The ADV2.1 provides the option of adjusting the LED brightness to best suit the viewing environment. There are 10 different dimmer settings available with setting 0 being the brightest and most intense and setting 9 being the dimmest and least intense. When a dimming level is selected, the green LED on the front panel will reflect the chosen level immediately and that setting will be saved in the ADV2.1 until it is changed.
Using an Alternate Remote Programming a Power Key A power key can be programmed to perform one of three different tasks: turn the unit on or off in a toggle progression, only turn the unit on, or only turn the unit off. Power On / Off 1. Turn on the unit. 2. Make sure there are no other infrared remote control signals interfering with the unit during the programming process. 3. Press and hold the input selector button on the front panel for 5 seconds until the LED turns on. 4.
Troubleshooting Troubleshooting Before calling AVLinx for servicing assistance, review the following guide for a possible solution to the problem. Problem The unit will not turn on. RS-232 port is not working Poor video picture. 14 Cause Solution -Power cord is not connected. -Plug the cord securely into the back of the unit as well as the wall. -The outlet in the wall connected to the unit is turned off. -Plug the unit into a nonswitched outlet or turn the outlet switch on.
Warranty Limited Warranty AVLinx Systems LLC warrants this product to be free from defects in materials and workmanship that adversely affect the operation described in this manual for a period of one (1) year from the date of sale. This warranty applies to the original owner of the product purchased directly through AVLinx Systems LLC or an authorized reseller. AVLinx Systems LLC will have the option to repair or replace defective equipment covered by this warranty at its sole discretion.
Appendices Appendices Appendix A: Compatible Remote Control Format The following are products whose remote control data format is compatible with the ADV2.1. The format used by the ADV2.1 is the NEC type with a 38khz carrier frequency. Many universal or multi-function remote controls are able to be programmed to emulate the remote control codes from these products.
