Manual

Distribution Amplifier (DA)—User Manual

Firmware Upgrade

Before upgrading firmware, you have to receive a Firmware burn package containing all

software needed for burning. Follow the steps as below to upgrade the HDMI Extender

(HX-RW) firmware:

1. Connect the power cord to the power port on the panel of HDMI Extender (HX-RW).

The other end of the power cord connected to a suitable power source.

2. Connect the control PC and HDMI Extender (HX-RW) with a RS-232 cable.

3. On the control PC, decompress the Firmware burn package file.

4. Process the UpdateRX_xxxx.bat file to upgrade HDMI Extender (HX-RW) firmware.

(xxxx is specified for firmware version)