User`s guide

2.5 COMMANDS FOR PERIPHERAL EQUIPMENT
2.5.1 X-15 PROGRAMMING COMMANDS
7
NOTES :
1. The GENESIS allows you to use
two X-15s in line with your
dissolve units (one each on
OUT1 & OUT2) and a3lows you to
use both the X-15 and dissolve
auxiliaries with their respec-
tive commands.
2. All auxiliary cues must
specify screen and projector
independents.
7
3. You can NOT have an auxiliary
command for the
XI5 and an
auxiliary in your dissolve
unit in the same cue.
XS (SHORT PULSE)
This will initiate a momentary (05
seconds) closure of the contacts. This
amount of contact closure time is
usually sufficient for most auxiliary
equipment.