User`s guide

2.2 PRINT COMMANDS
The following print commands and print
'-7
parameters are Control Command Field
entries.
NOTE: SPD, PLP, or SLP must be
specified BEFORE the commands PLB
or PRINT are used. If not
AVL
Genesis will automatically select:
SPD 300, NPB, and SLP.
PRINT
This command prints Program Name,
Operator Name, and Cue information on an
external printer.
-7
PLB (PRINT LIBRARY)
This command will print all directory
information on an external printer.
SPD (PRINTER SPEED SELECT)
This command selects the Baud rate of
the external printer. (See printer
manual for suggested Baud rate). The
values that
AVL Genesis will accept are
as follows: 75,
110, 150, 300, 600,
1200, 1800, 3600, 4800, 7200, and 9600.
If not specified, AVL GENESIS will
default to Baud RATE 300.
'7