User`s guide

ESC (ESCAPE)
7
This allows you to ESCAPE (stop) any
action that is being carried out by the
AVL GENESIS. ESCAPE will turn off the
MAG TAPE INPUT and cause the system to
ignore Clock-trak, SMPTE, or data
information. Pressing any key (AVL
recommends you use the space bar) will
turn the MAG TAPE INPUT back on. The.
ESC key also returns you to the
programming mode from the Control
. Command mode.
Q (STEP CUE)
The
Q key will step you through the
,, program in the forward direction each
time you push the key. Scrolling in the
forward direction at
10 cues per second
may be initiated by depressing the
Q key
'and holding it down.