User`s guide

CTRL/U (Change Mode)
/7
This command will allow the user to
change assignments to different
locations while creating a screen
format.
CTRL/X (AUX DISCONNECT/NORMAL)
This disconnects or disables auxiliary
cues from going out of the AVL GENESIS
system.
~ame'as typing AD or AN in the
Control Command field.
CUE
(FlO key)
The CUE key commands the AVL GENESIS
-7 system to execute a cue or run a
sequence from memory. When you are
using Clock-trak or SMPTE, the
AVL
GENESIS will execute a chain of cues
from memory until the next time cue is
encountered. If you are hand cueing or
remote cueing the system, CUE
will step
the program one cue at a time or start a
run sequence if that cue has a RUN
included in it. If projectors have been
formatted for both BANK A and BANK B,
but you first want to program BANK A
only, use CUE to enter cues because it
eliminates having the cursor moving into
BANK
B. When booting up the system, CUE
will move you directly to the standard
format.
T'