User`s guide

2.2.2 COMMANDS ENTERED UNDER THE SCREEN
,-
HEADING
The GO command is used in the screen
area of the display line to designate
one of the following:
1. To mark the beginning of a
REPEAT sequence.
2. To initiate a RUN sequence.
3. As a reference point.
S (STOP)
A
stop command is used in the screen
area of the display line to designate
one of the following:
1. To mark the end of a RUN
sequence.
2. To stop the screen action when
using Clock-trak
or SMPTE.