User`s guide

TBxx (TAB xx)
This is a label which may be nested in
r7
the program to mark different sections
of the show, where xx may be any two
characters.
TMxx (TIME hh:mm:ss:ff)
Time cues in .O1 second
steps may be
located in the program
at any desired
point. In this format
"hh" is hours,
11 m,,, 11
is minutes, "ss" is seconds and
"ff" is hundredths of seconds. You do
not have to enter unused fields. For
example
:
10 Becomes 10 Seconds
10: Becomes
10 Minutes
10:
: Becomes 10 Hours
The maximum value for a time cue is
approximately
11 hours and 39 minutes.
A time cue of 0.00 is not valid. If you
should attempt to enter a time cue less
than or equal to the current time, the
system will reject the cue and issue a
message
on the status line. A time cue
is essentially a null cue, that is,
nothing goes out the mag tape channel
when it is executed. When
a MAG TAPE
SAVE (MSV) operation is performed the
time cues are recorded on the tape. A
time cue takes less than .O1 seconds to
execute.
'7