User`s guide

PR (PROJECTOR REVERSE)
This command functions the same as the
7
PROJECTOR FORWARD command except that it
will reverse the trays one position.
PS (PRESET)
This command Presets specific projectors
to respond to the next action cue issued
to the corresponding dissolve unit.
This allows you to access projectors
that do not have like projector
assignments at the same time without the
normal
.1 or .05 seconds between cues.
Preset allows simultaneous action on the
assigned preset projectors when cued.
Preset can also be used to deselect. In
7
this case, you would select the
projectors you do not want to respond.
When a lamp command is executed on that
screen the preset projectors will not
respond.
RPO (REPEAT UNTIL TERMINATED)
This cue is used if an undetermined
number of REPEATS is desired. The RPO
can
be terminated by pressing the CUE
(F10) key or using a REMOTE CUE. This
command is useful when you are doing
"live" portions of your program and the
length of
a sequence is not known.
7