User`s guide

to the next image and that projector is
now ready to be turned ON again with the
next slide. When HARD CUTS are used to
make a transition between 2 visuals the
change is much crisper than a CUT. This
can be used to simulate the flicker of
an old time movie when moving through
many visuals rapidly.
SC (SOFT CUT)
A soft cut is a compromise between a cut
and a one second dissolve. The projector
with a down-going lamp will do a tray
advance.
r7 DISSOLVES
A Dissolve turns a projector lamp ON or
OFF in a designated amount of time in
seconds, creating a dissolve or a fade
effect,
e.g. 2D is a two second
dissolve. You can create a cross-fade
or dissolve from one visual to another
using a dissolve in conjunction with two
or more projectors. Again, the
projector with the down-going lamp will
have a tray advance.