User`s guide

1.7 ESC (ESCAPE)
While in the Control Command
,field,
depressing the CONTROL and P keys
(CTRL/P) will return you to the
programming field. However, AVL
recommends the ESC (ESCAPE) key be used
to return to the programming field from
the Control Command field, to reduce the
possibility of confusion with the
Projector Disconnect command.
1.8
FREEZE/PRESET DISPLAY
To provide even more information to the
user, current presets and freezes are
7
displayed in the Status area. Similar
to the case with loops and blinks, when
there is
a preset or freeze in effect,
the first digit of the tray position
will be blanked and a P displayed
indicating a preset or an
F indicating a
freeze on that particular projector.
Naturally, several letters cannot be
displayed simultaneously in the same
block so there is an order of
precedence.
A Loop or Blink status
display will override a Preset status
display and
a Preset status display will
override a Freeze status display.