User`s guide

NPB (NO PRINTER BUSY)
This command tells AVL Genesis not to
bother to look for a busy signal. This
also
Is the default condition if no
other busy commands are given to the AVL
Genesis.
PLP (PARALLEL LINE PRINTER)
This command depends upon the type of
External Printer used. Check the
printer specifications
to determine the
type of input your printer accepts.
(Parallel or Serial)
SLP (SERIAL LINE PRINTER)
This is the default condition if
Parallel Line Printer is not specified.
7
5.5 COMMANDS FOR OPTIONAL PERIPHERAL
EQUIPMENT
Chapter
7 describes the X-15 programming
commands used with any optional
peripheral equipment.