User`s guide

5.4 PRINT COMMANDS
7
The following print commands and print
parameters are Control Command Field
entries.
NOTE: SPD, PLP, or SLP must be
specified BEFORE the commands PLB
or PRINT are used. If not, AVL
Genesis will automatically select:
SPD 300, NPB, and SLP.
PRINT
This command prints Program Name,
Operator Name, and
Cue information on an
7 external printer.
PLB (PRINT LIBRARY)
This command will print all directory
information on an external printer.
SPD (PRINTER SPEED SELECT)
This command selects the Baud rate of
the external printer. (See your printer
manual for suggested Baud rate). The
values that AVL Genesis will accept are
as follows; 75, 110,
150, 300, 600,
1200, 1800, 3600, 4800, 7200 9600. If
not specified, AVL Genesis will default
-\
to BAUD RATE 300.