User`s guide

MIF (MAGNETIC TAPE INPUT OFF)
This will turn OFF any magnetic tape
input and the AVL Genesis
will ignore
any data input into the PLAY IN jack.
MIN (MAGNETIC TAPE INPUT ON)
This turns the magnetic tape input (PLAY
IN) back ON.
MLD (MAGNETIC TAPE LOAD)
This allows you to load a program into
the memory of the AVL Genesis from any
tape, directly from an AVL Genesis, or
one of
AVLts other programmers.
MOF (MAGNETIC TAPE OUTPUT OFF)
This will prevent the generation of data
information from the OUT
2 jack. When
this occurs only nulls are generated.
(A null is a signal that indicates the
absence
of data). Turning the output
off enables you to move through programs
without advancing the projectors.
MON (MAGNETIC TAPE OUTPUT ON)
This turns on data to the Out
1 and OUT
2 jacks.