User`s guide

stops. The AVL Genesis will display a
message warning you that the input from
tape has stopped.
Once a TIME or TIME
X cue has been
executed, the AVL Genesis will stay in
perfect sync with the time recorded on
the tape. The system will automatically
execute a
GOTO, if necessary, to
continue tracking with the Clock-trak
from tape. If you stop the tape and
fast forward or reverse the tape, the
system will
GOT0 the correct place in
the program automatically and update
projector lamp and tray status.
COM (CLOCK OUTPUT MODE)
7 This generates Clock-trak from the OUT 1
jack on the AVL Genesis for recording on
to magnetic tape. Normally the time
will begin at time zero. However, if
you want to start at a fixed point in
time, you can enter the starting time
(see next command).
COM
hh:mm:ss (CLOCK OUTPUT MODE)
This also generates Clock-trak from the
OUT
1 jack. However, if you want to
start at a fixed point in time, you can
enter the starting time (hours, minutes,
seconds, and hundredths).