User`s guide

RCN (REMOTE CUE ON)
7
This will return the remote cue jack
back to its normally on ON state.
RTC x.y (REPLACE TIME CUES WITH TX)
This command will replace all TIME cues
with TIME
X cues beginning with the
first cue specified (x) and continuing
until the last cue specified (y) has
been examined.
TOC x,y (TIME OFFSET CUES HH:MM:SS:FF)
This command allows you to add or
subtract a time value from either a
range of time cues or from all time cues
7 in memory. PROCALL-X will use the first
cue number
(x) to begin a search for
time cues to be modified and continue
until the last cue specified (y) has
been examined and changed.
TPOX (TRAY POSITION OFFSET)
This will set a starting tray position
for the position status. You can use
any
(x) number from 0 to 80.