User`s guide

CLN (CLEAR NOTES)
This permits you to clear a NOTE
currently stored in
the NOTE buffer.
CUES (DISPLAY TOTAL CUES)
This displays the total cue storage
capability of the memory and the amount
of cues remaining. Subtracting the two
will give you the total cues used in the
program.
ESN (EXCHANGE SCREEN NUMBERS)
ESN exchanges both screen numbers and
independents. ESN is entered as: ESN
-,
vx, yz, where v and y are screen numbers
or independents and, where
x and z are
either Bank A or Bank
B.
IAMxx (CHANGE OPERATORS NAME TO xx)
This command changes the operator name
on the program in memory to xx (xx may
be up to
25 characters in length).
KBF (KEYBOARD EDIT OFF)
This command disables the keyboard so
that no direct changes can be made to
the cues of the program. Any of the
features of the AVL Genesis system that
are available to you in the CONTROL
'7 COMMAND mode are still usable.