User`s guide

5.3 CONTROL COMMAND ENTRIES
The subparagraphs that follow list and
describe the following listed Control
Command field entries.
* Editing Control Commands
* Memory/Disk Data Transfer Commands
* Magnetic Tape Control Commands
* Serial and Parallel Print Commands
5.3.1 EDITING CONTROL COMMANDS
BPF ENTER (BEEPER OFF)
This allows you to turn the BEEPER
OFF.
BPN ENTER (BEEPER ON)
Turns the BEEPER back to normally ON.
CAC ENTER (CLEAR ALL CUES)
This command clears all cues from the
memory.
A home is also issued to the
dissolve units.
NOTE: Use CAC with caution. Be
sure you have stored the informa-
tion you are clearing or that you
really do not want the information.