User`s guide

ESC (ESCAPE)
This allows you to ESCAPE (stop) any
action that is being carried out
by the
AVL Genesis. ESCAPE will turn off the
MAG TAPE INPUT and cause the system to
ignore Clock-trak or data information.
Pressing any key will turn the MAG TAPE
INPU" back on; AVL recommends that you
use the space bar. The ESC key also
returns you to the programming mode from
the Control Command mode.
Q (STEP CUE)
This will step you through the program
in the FORWARD direction each time you
push the key. Scrolling in the forward
direction at
10 cues per second may be
initiated by depressing the
Q key and
holding
it down.
TAB (FORWARD TO NEXT TAB)
SAME as
CTRL/T, ENTER.
SPACE BAR (CURSOR RIGHT)
This key
is used to move the cursor to
the right without changing the character
the cursor is moving across.