User`s guide

CTRL/X (AUX DISCONNECT/NORMAL)
This disconnects or disables auxiliary
cues from going out of the AVL Genesis
system. Same as typing AD or AN in the
Control Command field.
This allows the display of the DOVE
X
number and projector designations in the
status area. This allows easy reference
to show which Independents correspond to
which projector. Pressing
CTRL/V again
returns status to normal.
CUE
(F10)
The CUE key commands the AVL GENESIS
system to execute
a cue or run a
sequence from memory. When you are
using Clock-trak, the AVL Genesis will
execute a chain of cues from memory
until the next time cue is encountered.
If you are hand cueing or remote cueing
the system, CUE will step the program
one cue at a time or start a run
sequence if that cue has a RUN included
in it. If projectors have been for-
matted for both BANK A and BANK B, but
you first want to program BANK A only,
use CUE to enter cues because it elimi-
nates having the cursor moving into BANK
B. When booting up the system, CUE will
move directly to the standard format.