User`s guide

CTRL/G,T,M, (GOT0 TIME HH:MM:SS:FF:)
This will issue a command to GOT0 the
desired time cue. If there is no time
'7
--
cue equal to the entered value, the
system will go to the next time cue
1.
greater than the desired cue. Same as
typing
GOT0 TIME in the Control Control
t
field.
CTRL/N (DISPLAY NOTES/NORMAL)
This is used to display a NOTE stored in
the note buffer (the program will
continue to run without interruption).
CTRL/P (SLIDES DISCONNECT/NORMAL)
This command disconnects or disables any
slide projector cues from going out of
the AVL Genesis system. Same as
typing PD or PN in the Control Command
field.
CTRL/Q (STEP REVERSE CUE)
This steps you through the program in
the REVERSE direction in the cue each
time the Q
is depressed while holding
down the Ctrl key. Reverse scrolling at
10 cues per second is initiated by
depressing the CTRL/Q and repeat keys
simultaneously.