User`s guide

CTRL/D (DELETE CUE)
?
This will delete (remove) the cue that
is being previewed and will close up the
memory.
CTRL/G, ENTER (HOME PROJECTORS)
This will issue a HOME cue to the
attached dissolve units and return the
program to CUE
#l. The lamps will come
down and the trays will move to their
original starting position via the
shortest route. This command functions
the same as typing
GOT0 in the Control
Command field.
'7
CTRL/Gxx (GOT0 CUE xx)
This will issue a command to the AVL
Genesis to
GOT0 a specified cue in
memory, where xx is the desired cue
number. The lamp status and tray
position will be updated to the dissolve
units. This cue is used to move from
any cue in memory to any other cue in
memory. Use
9999 as the cue number to
quickly move to the end
of your program,
since the
GOT0 will stop at the last cue
in memory. Same
as typing GOTOxx in
Control Command field