User`s guide

,-", TBxx (TAB XX)
This is a label which may be nested in
the program to mark different sections
of the show, where
xx may be any two
characters.
TX (TIME XI
TX is used to mark the beginning of a
timed
(RUN) sequence using the Clock-
trak. The X value is resolved when you
press the
F10 (CUE) key.
NOTE: TIME
(hh:mm:ss:ff) cues in
.O1 second steps may be located in
the program at any desired point.
In this format
"hh" is hours, "mm"
is minutes, "ss" is seconds and
"ff" is hundredths of seconds. You
do not have to enter unused fields.
For example:
10
Becomes
10 Seconds
10: Becomes
10 Minutes
10:
: Becomes
10 Hours
The maximum value for a time cue is
approximately 11 hours and
39 minutes.
A time cue of 0.00 is not valid. If you
should attempt to enter
a time cue less
than or equal to the current time, the
system will reject the cue and issue a
-\
message on the status line. A time cue