User`s guide

per second the AVL Genesis will
wait
.1 seconds between the time a
cue is issued and the time a
1
subsequent cue is issued. At 20
cues per second the system will
wait
.05 seconds between cues.
A
RUN sequence is initiated by
using a
RUN command (stopped by a
STOP command) or with the use of
time cues from the Clock-trak. A
RUN sequence will execute until it
encounters a stop or the next time
cue. Run sequences are used to fire
a series of cues rapidly with
precise timing.
SG (SMOOTH GO)
SG is a DOVE
X command which allows
direction change at any point in a
dissolve curve. This feature enables
the programmer to produce a rippling
effect by cueing other dissolves before
the completion of the previous dissolve.
If this procedure were done without
SMOOTH GO, the previous dissolve would
move to its ending state when another
dissolve is cued in, giving a popping
effect.
SS (SMOOTH STOP)
SS is used to return all Doves to normal
from SMOOTH state.