User`s guide

FA (FAST ALTERNATE)
This cue turns the lamp ON or OFF as
fast as the lamp allows.
It is used to
do alternates at
20 cues per second and
roughly equates to a HARD CUT with no
tray advance.
BA (BLINK ALTERNATE)
This new feature can best be defined as
a Fast ALT for a loop. If the projector
status states that the lamp is ON, a
BLINK ALT command will act as a FAST ALT
and turn the lamp ON and OFF
instantaneously. If the status says the
lamp is
OFF, the BA will not turn the
lamp on whereas FAST ALT will. This
eliminates the popping on of the lamps
at the end of a programmed blinking
dissolve sequence.
Secondly, if Blink Alt, Wait Cues, or
Freezes only are employed in a loop, it
is possible to program a dissolve after
a loop has been started. For example,
suppose we program a three projector
Blinking Loop using the BA command.
This Blinking loop can be dissolved up
and down, similar to methods used with
the older Version
5 BLINK GO command.